Advertisement
switched off the kettle, it must be allowed to
cool down suffi ciently, or must be descaled
before it is switched on again.
Safety lid
The safety lid greatly reduces the risk
of hot water escaping if the container is
accidentally knocked over on the work
surface. In the event of it falling from a
certain height, however, it is possible hot
water might escape from the lid. After any
accident of this kind, be sure to check for
any signs of damage. The appliance must
always be supervised when in use.
Before using for the fi rst time
To clean the kettle, boil and discard the fi rst
fi lling of water.
Boiling water
∙ Remove the water container from its
base.
∙ Push the locking tabs together and
remove the water container lid.
∙ Fill the container with water to the desired
level, observing the Min. and Max.
markings.
∙ Push the locking tabs together again and
replace the lid, ensuring that it is properly
fi tted.
∙ Place the container back on its base.
∙ Insert the plug into a suitable wall socket
and press the On/Off switch; the indicator
light comes on.
∙ The boiling process begins. After reaching
the boiling point, the appliance is
automatically switched off by the integral
steam cut-off device. The pilot light goes
out.
∙ To interrupt the boiling process, set the
On/Off switch to its Off position.
10
∙ To pour hot water, remove the container
from its base.
∙ To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.
∙ Remove the plug from the wall outlet after
use.
∙ Do not leave any residual water in the
container.
Power cord wind-up storage
The wind-up power cord storage under the
base facilitates limiting the length of the
power cord during use and makes it easy to
store the appliance.
Descaling
Depending on the water quality in your area,
lime deposits may build up inside the water
container. It is advisable to remove any such
deposits at regular intervals. Any warranty
claim will be null and void if the kettle
malfunctions because of insuffi cient
descaling. A mixture of 0.5 litres of water
to two tablespoons of vinegar essence is
suitable.
∙ Pour the descaler in.
∙ Switch the appliance on and let the
solution reach boiling point.
∙ Leave it to take effect for a short period.
∙ To clean the container after descaling,
rinse thoroughly with clean water.
∙ Do not pour descalers down enamel-
coated sinks.
General cleaning and care
∙ Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
∙ To avoid the risk of electric shock, do not
clean the kettle and the base with water
Advertisement
