PLASMACLUSTER OPERATION
Plasmacluster Ions released into the room will
reduce some airborne mold.
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp on the unit will
turn off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time
you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press
the DISPLAY button.
• To perform the PLASMACLUSTER operation in
fan only mode, press the PLASMACLUSTER
button while the unit is not operating. The mode
symbol of the remote control will go off and the
fan speed can not be set AUTO.
SELF CLEAN OPERATION
SELF CLEAN operation will reduce the growth
mold fungus with Plasmacluster ions, and dry
inside of the air conditioner unit.
Utilize the operation at seasonal change over
terms.
".
1
Press the SELF CLEAN button when the
unit is not operating.
• The remote control displays "
• The green OPERATION lamp (
green SELF CLEAN lamp (
PLASMACLUSTER lamp on the unit will light
up.
• The unit will stop operation after forty minutes.
1
TO CANCEL
Press the SELF CLEAN button.
Alternatively, turn the unit off by pressing the
ON/OFF button.
• T h e g r e e n O P E R AT I O N l a m p (
green SELF CLEAN lamp (
PLASMACLUSTER lamp on the unit will turn off.
NOTE:
• You cannot set the temperature, fan speed, air
fl ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be eliminated
by this operation.
9
".
), the
) and the blue
1
) , t h e
) and the blue