Sdc User Interface - Paradyne 3980-A2-GZ40-20 Features Manual

SDC User Interface

When SDC is enabled, the following configuration options are available to set up the SDC feature. Some of the
configuration options are not displayed unless SDC is enabled.
V.42/MNP/Buffer (see Table 1)
Sync Comp Mode
SDC Negotiation
SDC Idle Fill
SDC Bit Encoding
Sync DTE CRC
SDC Delay Min
Sync Flow Control
TX Buff Disc Delay
RX Buff Disc Delay
Max Frame Size
Cellular Enhance
DTE Interface (see Table 2)
Sync DTE Rate
Tx Clock Source
4
November 1996 3980-A2-GZ40-20