HP ProLiant DL380 g3 Quickspecs page 36

QuickSpecs
Technical Specifications
Integrated Smart Array 5i
Plus Controller
Data Compatible with all
Smart Array Controllers
Instant Upgrades to other
Smart Array Controllers
Consistent Software
Manageability Tools
PCI-X Bus
PCI-X Peak Data
Transfer Rate
SCSI Protocols Supported Ultra3, Ultra2
SCSI Peak Data
Transfer Rate
Channels
SCSI Ports
(external/internal)
Drives Supported
(maximum)
Cache
Battery-Backed Write
Cache
RAID Support
Logical Drives
(maximum)
Online Configuration
Online Capacity Expansion Yes
Logical Drive Capacity
Extension
Online Stripe Size
Migration
Online RAID Level
Migration
Online Spare Support
Automatic Data Recovery
Drive Roaming
Redundant Controllers
DA - 11473 Worldwide — Version 45 — December 13, 2004
HP ProLiant DL380 Generation 3 (G3)
Yes
Yes
Yes
64-bit, 100 MHz (integrated on system board)
800 MB/s
160 MB/s per channel
NOTE: For ProLiant servers having TWO internal drive bays on separate SCSI ports:
SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2.
2
NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports:
SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2.
0/2
NOTE: For ProLiant servers having two internal drive bays on separate SCSI ports:
SCSI Peak Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2.
Maximum = total number of drives
NOTE: Maximum is the total number of internal drives on each specific ProLiant
server.
64 MB Read and/or Write Cache
Yes, with installation of Battery-Backed Write Cache Enabler, up to 64MB
0, 1, 1+0, 5
Maximum = total number of drives
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Page 36