Digital Zoom - HP Photosmart R930 series User Manual

Digital zoom

In digital zoom, the Image Display shows a yellow frame around the scene and the image
quality setting (MP value). As you zoom in, the scene enlarges within the yellow frame to
indicate the area of the scene the camera will capture, and the MP value decreases to
indicate the resolution at which the scene will be captured.
When capturing images using digital zoom, make sure that the MP value shown in the
Image Display is appropriate for the size at which you want to print the captured image.
For MP values and their recommended print sizes, see Image Quality under
Picture Capture and Video Record menus" on page
To use digital zoom:
1. While in
maximum level, then release the lever.
2. Press and hold
zoom in too far, press
3. To return to optical zoom, press
press it again.
NOTE:
video clips.
Downloaded from ManualsCamera.com Manuals
Picture Capture, press
until the image you want to capture fills the yellow frame. If you
.
Digital zoom is not available in
18.
on the Zoom lever to optically zoom to the
until digital zooming stops. Release
/ Panorama mode nor when recording
"Using the
, then
Using zoom 15