Sony playstation 2 scph101 Instruction Manual page 40

40
C
!¢
!§
US
To save the stored operation on
a memory card
!∞
Press the R2 button while holding
down the ✕ button.
A round mark appears on the
upper right of the screen (C!§).
Note
You can store only one custom SoundScope
operation setting. If the data already exists,
!¶ it is erased.
To load the data from a memory
card
Press the L2 button while holding
down the ✕ button.
A round mark appears on the
upper left of the screen (C!¶). To
activate the loaded data, wait until
the mark disappears and then
follow the procedure "To switch to
stored settings" on page 38.
Enjoying SoundScope (continued)