Securing A Child Restraint In A Rear Seat Position - Suzuki reno 2006 Owner's Manual

Child Restraints:
Securing a Child Restraint in a Rear
Seat Position
If your child restraint is equipped with the
LATCH system, see "Lower Anchorages
and Top Tethers for Children (LATCH Sys-
tem)" in this section. See "Top Strap" in
this section if the child restraint has one.
If your child restraint does not have the
LATCH system, you will be using the lap-
shoulder belt to secure the child restraint in
this position. Be sure to follow the instruc-
tions that came with the child restraint.
Secure the child in the child restraint when
and as the instructions say.
1) Put the restraint on the seat.
2) Pick up the latch plate, and run the lap
and shoulder portions of the vehicle's
safety belt through or around the
restraint. The child restraint instructions
will show you how.
Downloaded from www.Manualslib.com
L3U1031A
3) Buckle the belt. Make sure the release
button is positioned so you would be
able to unbuckle the safety belt quickly
if you ever had to.
4) Pull the rest of the shoulder belt all the
way out of the retractor to set the lock.
manuals search engine
SEATS AND RESTRAINT SYSTEMS
L3U1052A
5) To tighten the belt, feed the shoulder
belt back into the retractor while you
push down on the child restraint. If
you're using a forward-facing child
restraint, you may find it helpful to use
your knee to push down on the child
restraint as you tighten the belt.
6) Push and pull the child restraint in dif-
ferent directions to be sure it is secure.
To remove the child restraint, just unbuckle
the vehicle's safety belt and let it go back
all the way. The safety belt will move freely
again and be ready to work for an adult or
larger child passenger.
L3U1053A
L3U1054A
1-24