Suzuki reno 2006 Owner's Manual page 137

Table of Contents

Advertisement

ton until "FAD" appears on the display.
Turn the volume knob to shift the balance
between the front and the rear speakers.
The display will show the fade level. When
finished making the selection, press the
SOUND button to set the fade level.
Setting the Equalization
The scroll order for the customized equal-
ization settings is EQ OFF, CLASSIC,
DANCE, ROCK, JAZZ, POP, VOICE,
TECHNO, EQ OFF.
Press the SOUND button until "EQ OFF"
appears on the display to select custom-
ized equalization settings designed for
classic, dance, rock, jazz, pop, voice and
techno music. Turn the volume knob until
the desired equalization setting appears
on the display. When finished making the
selection, press the SOUND button to set
the equalization setting.
To cancel an equalization setting, press
the SOUND button until "EQ OFF" appears
on the display, turn the volume knob until
"OFF" appears on the display, then press
the SOUND button again.
Downloaded from
www.Manualslib.com
PLAYING A TAPE
Insert a tape into the tape insert hole (7).
You can see the message "LOAD" and
"PLAY".
2 RPT (Repeat) button (5):
Press this button to repeat the current
track. "RPT" will appear on the display.
Press this button again to turn off repeat
play.
TUNE button (3):
Press the down arrows to go to rewind to
the first track on the current side of the
tape. "REW" will appear on the display.
When the tape is fully rewound, it is played
back from the beginning of the same side.
To stop the rewind movement, press the
TAPE button (8) or the down arrows button
or the repeat button (5). The repeat button
(5) is effective to only the case when the
repeat function is not active.
Press the up arrows to advance to the first
track on the opposite side of the tape. "FF"
will appear on the display. When the tape
reaches the end, it is automatically
reversed and played back from the begin-
ning of the opposite side. To stop the fast
forward movement, press the TAPE button
(8) or the up arrows button or the repeat
button (5). The repeat button (5) is effec-
tive to only the case when the repeat func-
tion is not active.
manuals search engine
INSTRUMENT PANEL
SEEK/AST (Previous/Next Track) button
(4):
Press the down arrows to go to the start of
the current track or press the up arrows to
go to the next track. "A-FF" or "A-REW" will
appear on the display. The player will con-
tinue moving backward or forward through
the TAPE with each press of the up or
down arrows.
TAPE button (8):
Press this button to change the play direc-
tion. The tape player will change to forward
or reverse direction.
AM/FM button (2):
Press this button to listen to the radio when
a tape is playing. The inactive tape will
remain safely inside the radio for future lis-
tening.
CD button (9):
Press this button to play a CD when a tape
is playing. "CDP" will appear on the display
when the CD player has been selected.
The CD symbol will appear on the display
when a CD is loaded.
Press this button while a CD is playing to
pause the CD. "PAUSE" will flash on the
display. Press this button again to start
playing the CD.
EJECT button (10):
Press this button to eject a tape.
3-64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents