Suzuki reno 2006 Owner's Manual page 214

Tires:
SERVICE AND APPEARANCE CARE
WARNING
Raising your vehicle with the jack
improperly positioned can damage
the vehicle and even make the vehi-
cle fall. To help avoid personal injury
and vehicle damage, be sure to fit the
jack lift head into the proper location
before raising the vehicle.
4) Insert the jack handle and the wheel
wrench into the jack.
5) Raise the vehicle by turning the jack
handle clockwise. Raise the vehicle far
enough off the ground so there is
enough room for the compact spare tire
to fit underneath the wheel well.
6) Remove all of the wheel nuts by turning
them counterclockwise.
7) Remove the flat tire.
5-39
Downloaded from www.Manualslib.com
8) Remove any rust or dirt from the wheel
bolts, mounting surfaces and spare
wheel.
Rust or dirt on the wheel, or on the
parts to which it is fastened, can
make the wheel nuts become loose
after a time. The wheel could come
off and cause an accident. When you
change a wheel, remove any rust or
dirt from the places where the wheel
attaches to the vehicle. In an emer-
gency, you can use a cloth or a paper
towel to do this, but be sure to use a
scraper or wire brush later, if you
need to, to get all the rust or dirt off.
manuals search engine
9) Place the compact spare tire on the
10)Reinstall the wheel nuts with the
11)Lower the vehicle by turning the wheel
WARNING
12)Tighten the wheel nuts firmly in a criss-
WARNING
Never use oil or grease on studs or
nuts. If you do, the nuts might come
loose. Your wheel could fall off, caus-
ing a serious accident.
wheel-mounting surface.
rounded end of the nuts toward the
wheel. Tighten each wheel nut by turn-
ing it clockwise with your hand until the
wheel is held against the hub.
handle counterclockwise. Lower the
jack completely.
cross sequence as shown.