Sew A Button - Janome mystyle 16 User Manual

SECTION 3.
LEARN THE STITCHES
Zigzag Stitches (Continued)
*Sew a Button
Set the Machine
Stitch width control
Must be adjusted
Top thread tension
control 2 toG6
Stitch length control ------
Any number lnott
S necessary to adjust)J
4." N
Use
the darning plate for button sewing (see page 26).
To strengthen the shank, cut the
\ 3 1.
Match the center of the button holes to the center of the slot on the presser
threads leaving a 20 cm tail. Bring the
4 foot-
needle thread down through the hole
2.
Adjust the stitch width so that needle will drop in each hole.
sn hank to.n wn i
run h
FM ý
Stretch Stitch
3. Lower the foot to hold the button in place.
Da h hedt h otmsd
A:
igzg fotTurn
the hand wheel by hand so that needle will enter either hole of the
and knot.
Dar
button.
Darin plte4.
Stitch several times,
32