Sew In A Zipper - Janome mystyle 16 User Manual

SECTION 3. LEARN THE STITCHES
Sew in a Zipper
Fabric Preparation:
Set the Machine
Put the top sides of the fabric together
Stitch width 0.2 to 0.3 con te
and sew to the end of the zipper
control 0
opening. Use the reverse to lock the
stitches.
Sew the zipper opening with stitch
length at "4" and top thread tension
Bhottrnp
at -3". side of
Top thread tension
fabric
control
2
to 6Botmsd
Stitch length
j o-abi
s
control 2
-
~~Ldofoenn
To Sew:
4.
Attach the presser bar to the right
~~~~7~~
N
. Reset stitch length at 2 and top
pn ntezpe ot
Kthread tension at 2 to 6.
5. Lower the zipper foot on the top
Top side
KFold back the left seam allowance side at the bottom of the zipper
of farc-
as shown,
so that the needle pierces the fold
StechSith2.
Turn under the right seam allow-
and the zipper tape.
ance to form a 0.2 to 0.3 cm fold. 6. Sew through the fold and the
Top edge of fabric
E:
Zipper
zipper tape to the point where the
foot
3.
Place the zipper teeth next to the
sie
eis
0.2 to 0.3 cm fold and pin in sie eis
To attach the zipper foot:
place. 7.
Lower the needle to hold the
fabric and raise the presser foot.
* To sew on the left side of the zipper,
attach the presser bar to the right pins
on the zipper foot.
on the*
To sew on the right side of the zipper.
no sde 0
attach the presser bar to the left pins
a-.
on the zipper foot.
40