System Initialization; Entering The Security Code; Acquiring Gps Information - Acura MDX 2014 Navigation Manual

System Initialization

The navigation system must be initialized if
power to the navigation system is
interrupted for any reason (e.g., the
battery was disconnected).

Entering the Security Code

In most cases, you do not need to enter a
security code. Follow the steps to
reactivate the system.
308
1. Set the power mode to ON, and turn on
the audio system.
2. Press and hold the 9 (Power) button
for more than two seconds.

The system is reactivated when the
system's control unit recognizes that
the system is in your vehicle.
If the control unit fails to recognize,
you must go to a dealer and have the
system checked.

Acquiring GPS Information

Depending on the length of time the
power was interrupted, your system may
require GPS initialization.
If initialization is not necessary, the system
proceeds directly to the Startup
Confirmation screen.
If the system fails to locate a sufficient
number of satellites to locate your position
within 10 minutes, the following screen is
displayed.