Acura MDX 2014 Navigation Manual page 299

TroubleshootingGuidance, Routing
The screen is showing white dots as I drive along.
How do I remove the white dots ("breadcrumbs")
from my screen?
A road that I selected to avoid is being used when
routing.
My elevation (shown when I display the current
position) seems to fluctuate even though my elevation
has not changed.
My elevation is missing on the "current position"
screen.
298
Problem
These dots are called "breadcrumbs." These are displayed if Display Tracking is set to
On.
2 Display Tracking P. 83
Press the SETTINGS button. Select Navi Settings > Map, set Display Tracking to Off
or select Delete Tracking to remove the white dots from the map.
2 Display Tracking P. 83
When you "draw" your area to avoid, make sure to select sections of roads that
include at least one intersection.
2 Avoided Area P. 60
This is normal. The elevation can vary ±100 feet due to GPS calculation errors.
2 GPS System P. 310
The elevation is only displayed if the GPS antenna can receive signals from at least four
satellites. Try moving the vehicle into an open area. The elevation is also not displayed
if the calculated elevation is zero or below sea level.
Solution