Performance Data; Airflow Delivery - Cooling, Heating, Electric Heating Modes; Airflow Performance - Available External Static Pressure - Bryant fe4anf005 Installation Instructions Manual

AIRFLOW DELIVERY — COOLING, HEATING, ELECTRIC HEATING MODES
The FE4 fan coil will provide airflow at a rate that is requested by
the Integrated System User Interface during Air Conditioning or
Heat Pump Heating (without electric heat) modes. The nominal
airflow for both heating and cooling modes is 350 cfm/ton
nominal refrigeration size of the outdoor unit installed. The
airflow actually requested by the User Interface is modified by its
internal algorithms for zoning, comfort or efficiency concerns.

AIRFLOW PERFORMANCE - AVAILABLE EXTERNAL STATIC PRESSURE

PERFORMANCE DATA

FAN COIL
MODEL AIRFLOW DELIVERY
525 CFM
700 CFM
FE4ANF002
875 CFM
1050 CFM
700 CFM
875 CFM
FE4ANF003
1050 CFM
1225 CFM
875 CFM
1050 CFM
FE4ANF005
1225 CFM
1400 CFM
1050 CFM
1225 CFM
FE4ANB006
1400 CFM
1750 CFM
Refer to the documentation for the User Interface for more
information on how the User Interface controls the fan coil. Safe
operation of electric heaters requires airflow delivery at or above
the minimum CFM for electric heater application listed in the
chart below. The fan coil will adjust its airflow delivery to maintain
safe airflow as operating mode and staging conditions require.
AVAILABLE STATIC
PRESSURE
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
0.80 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
1.00 IN. H2O
—6—