Table of Contents
Advertisement
Appendix
Related Standards
International Standards
• IEC61496-1:2004/A1:2007 Safety of machinery - Electro-sensitive protective equipment - Part 1:
General requirements and tests
• IEC61496-2:2006 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular
requirements for equipment using active opto-electronic protective devices
• IEC61508-1 to 3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems
• ISO13855:2002 Safety of machinery - Positioning of protective equipment with respect to the approach
speeds of parts of the human body
• ISO13849-1: 2006 Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
European Standards
• EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
• EN61496-1:2004/A1:2008 Safety of machinery - Electro-sensitive protective equipment - Part 1: General
requirements and tests
• CLC/TS 61496-2:2006 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular
requirements for equipment using active opto-electronic protective devices
• EN61508-1 through -3:2010 Functional safety of electrical/electronic/programmable electronic safety-
related systems
• EN415-4:1997 Palletisers and depalletisers
• EN692:1996 Mechanical presses
• EN693:2001 Hydraulic presses
•EN999:1999 Safety of machinery - Positioning of protective equipment with respect to the approach
speeds of parts of the human body
• EN1037:1995 Safety of machinery : Preventation of unexpected start-up
U.S. Federal Regurations
•OSHA 29 CFR 1910.212 General requirements for all machines
•OSHA 29 CFR 1910.217 Mechanical power presses
U.S. Standards
• ANSI B11.1:2001 Mechanical power presses
• ANSI B11.2:1995(R2005) Hydraulic power presses
• ANSI B11.3:2002 Power press brakes
• ANSI B11.4:2003 Metal shears
• ANSI B11.5:1988(R2002) Iron workers
• ANSI B11.6:2001 Lathes
• ANSI B11.7:1995(R2005) Cold headers and cold formers
• ANSI B11.8:2001 Drilling, milling, and boring machines
• ANSI B11.9:1975(R2005) Grinding machines
• ANSI B11.10:2003 Metal sawing machines
• ANSI B11.11:2001 Gear cutting machines
• ANSI B11.12:2005 Roll forming and roll bending machines
F3SJ-A
200
User's Manual
Advertisement
Table of Contents
