Working Mode - TP-Link TL-WR840N User Manual

Chapter 6
• Channel - The current wireless channel in use.
• Mode - The current wireless working mode in use.
• Channel Width
• MAC Address
• Traffic Statistics - The router's traffic statistics.
• Received (Bytes)
• Received (Packets)
• Sent (Bytes)
• Sent (Packets)
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
6. 2.

Working Mode

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Working Mode.
3. Select the working mode as needed and click Save.
6. 3. Network
6. 3. 1. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
- The current wireless channel width in use.
- The physical address of the router.
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in bytes sent out from the WAN port.
- Traffic in packets sent out from the WAN port.
96