TP-Link TL-WR840N User Manual page 14

Chapter 2
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device's screen, here takes an Android phone as an
example.
2 ) Immediately press the WPS button on your router.
POWER WAN
3. Enter http://tplinkwifi.net
then click Login.
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to Tools menu >
Internet Options > Connections > LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click
OK to finish it.
4. After successfully login, select
complete the configuration.
5. Enjoy! For wireless devices, you may have to reconnect to the wireless network if you have
customized the SSID (wireless name) and password during the configuration.
WPS/
1 2 3 4 RESET
in the address bar of a web browser. Use
Standard Wireless Router
Close to
admin for password, and
mode and follow Quick Setup to
9