Wds Setting - Edimax br-6204wlg User Manual

connect is listed. If not, please click 'Refresh' button. You may have to click
'Refresh button for several times before the access point you wish to connect
appears.
When the access point you wish to connect appears, click 'Select' of that
access point, then click 'Connect' button. This router will use current
encryption setting to connect to selected access point.

2-7-6 WDS Setting

This wireless router supports WDS (Wireless Distribution System). You can
connect this router with other WDS-enabled wireless access point, and all
clients (wireless & wired) of every WDS-enabled wireless access point can
communicate with each other. Therefore, you can use WDS to extend the
range and scope of your network.
To use WDS, you must select 'WDS' or 'AP+WDS' as working mode (as
described in chapter 2-7-1). WDS function will not work in other working
modes.
The descriptions of every setup item are listed below:
Item Name
Enable WDS
Description
Check this box to enable WDS function. This
option is only available when the working mode of
this router is 'WDS' or 'AP+WDS'.
67