Download
Share
Print this page
ParaBody 813102 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. ParaBody Manuals
  4. Fitness Equipment
  5. 813102
  6. Assembly instructions manual
ParaBody 813102 Assembly Instructions Manual

ParaBody 813102 Assembly Instructions Manual

Vkr/chin/dip
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Serious
813102
VKR/CHIN/DIP
ASSEMBLY INSTRUCTIONS
Part# 6812201
Revision: 01/17/00

Advertisement

loading

Related Manuals for ParaBody 813102

Summary of Contents for ParaBody 813102

  • Page 1 Serious 813102 VKR/CHIN/DIP ASSEMBLY INSTRUCTIONS Part# 6812201 Revision: 01/17/00...

  • Page 2: Welcome To The World Of

    2. Do not allow minors or children to play on or around this equipment. 3. Exercise with care to avoid injury. 4. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.
  • Page 3 PART# DESCRIPTION 6102303 BASE CONNECTOR 6480003 " CHINBAR 6480503 VKRSIDE : ... 6480903 UPPERBACK SUPPORT ¯ 5 6665902 BACKPAD 6752702 ARM PAD 310250 1 3/8" FLAT WASHER 3102601 3/8" LOCK WASHER FIGURE 1 STEP 1: ¯ Insert four 2" SQ. COVER CAPS (15) into the ends of the VKR SIDES (3) as shown in FIGURE ¯...
  • Page 4 FIGURE 2 STEP 2: ¯ LOOSELY assemble the UPPER BACK SUPPORT (4) to the VKR SIDES’, (3) using two 3/8 X 3" BOLTS (10), four 3/8" FLAT WASHERS (7), and two 3/8" LOCK NUTS (9) as shown in FIGURE ¯ LOOSELY assemble the two BASE CONNECTORS sixteen 3/8"...
  • Page 5 FIGURE 3 STEP 3: ¯ LOOSELY assemble the CHIN BAR (2) to the VKR SIDES (3) using two 3/8 X 3" BOLTS (10), four 3/8" WASHERS (7), and two 3/8" LOCK NUTS. ¯ SECURELY tigten all connections made up to this point.
  • Page 6 FIGURE 4 STEP 4: SECURELY attach two ARM PADS (6) to the VKR SIDES (3) using four 3/8 X 3" BOLTS (10), four 3/8" WASHERS (8), and four 3/8" FLAT WASHERS (7) as shown in FIGURE 4. (NOTE: Place the high side of A1LM PAD toward the outside.)
  • Page 7 3/8 X 3" FIGURE 5 STEP 5: ¯ SECURELY assemble the BACK PAD (5) to the UPPER BACK SUPPOI~.T (4) using two 3/8 X 3" BOLTS (1 two 3/8" LOCK WASHEP~S (8), two 3/8" FLAT WASHERS (7) as shown in FIGUR~...
  • Page 8 FIGURE 6. (NOTE: Rubbing alcohol can be used on the inside of the grips to make them slide on easier.) Thank you for purchasing the Parabody 884101 SAFTEY RAIL ATTACI~IENT. If unsure ofproper use of equipment, call your local Parabody distributor or call the Parabody customer service department at...