Manual Wireless Settings; N/G (2.4Ghz) - D-Link DIR-825 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Schedule:
Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down menu.
Click New.Schedule to create a schedule.
Wireless Network Service Set Identifier (SSID) is the name of your wireless
Name:
network. Create a name for your wireless network using up to 32 characters. The SSID is case-sensitive.
802.11 Mode:
Select one of the following:
802.11b.Only - Select only if all of your wireless clients are 802.11b.
802.11g.Only - Select only if all of your wireless clients are 802.11g.
802.11n.Only - Select only if all of your wireless clients are 802.11n.
Mixed.802.11g.and.802.11b - Select if you are using both 802.11g and 802.11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using both 802.11n and 802.11g wireless clients.
Mixed.802.11n,.11g,.and.11b - Select if you are using a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Enable Auto
The Auto.Channel.Scan setting can be selected to allow the DIR-825 to choose the channel with the least amount of interference.
Channel Scan:
Wireless Channel:
Indicates the channel setting for the DIR-825. By default the channel is set to 6. The Channel can be changed to fit the channel
setting for an existing wireless network or to customize the wireless network. If you enable Auto.Channel.Scan, this option will
be greyed out.
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best.(Auto) for best performance.
D-Link DIR-825 User Manual

Manual Wireless Settings

802.11n/g (2.4GHz)

34