JVC PD-Z35DV4 Service Manual page 18

3.2 DISASSEMBLY PROCEDURE [PD-Z35DV4, PD-Z35DV4/S]
CAUTION:
•
When exchanging parts etc. with the front side (PDP side)
facing down, please place a protection sheet below before
starting, so as to prevent scratches on the front side.
3.2.1 REMOVING THE REAR COVER (Fig.6)
(1) Remove the power cord.
(2) Remove the 14 screws [A], the 6 screws [B] and the 8
screws [C], and remove the REAR COVER.
(x6) B
A (x14)
D (x7)
1-18 (No.YA101)
3.2.2 REMOVING THE TERMINAL COVER AND CENTER COVER
(Fig.6)
•
Remove the REAR COVER.
(1) Remove the 7 screws [D], and remove the CHASSIS
SHIELD COVER.
(2) Remove the 6 screws [E], and remove the CENTER
COVER.
(3) Disconnect the COAXIAL CABLE.
(4) Remove the 6 screws [F], the 12 screws [G], the 1 screw
[H], and the 1 connector [I], and remove the TERMINAL
COVER.
C (x8)
REAR COVER
CHASSIS
SHIELD COVER
Fig. 6
(x2) F
COAXIAL
CABLE
G
(x12)
I
F
(x2)
(x6) E
CENTER COVER
TERMINAL
COVER
I
H
(x2)
F