3.1.19 REMOVING THE SPEAKER (Fig.5)
•
Remove the REAR COVER
•
Remove the CENTER COVER.
•
Remove the CHASSIS SHIELD COVER.
•
Remove the TERMINAL COVER.
•
Remove the MAIN BASE, CHASSIS BASE and AUDIO PWB
BASE (with each PWB affixed on the MAIN BASE, CHASSIS
BASE and AUDIO PWB BASE).
(1) Remove the 3 screws [r], and remove the SPEAKER.
(2) Follow the same steps when removing the other hand
SPEAKER.
CAUTION:
•
Please do not disassembly the SPEAKER.
When the speaker is decomposed, the performance cannot
be kept.
3.1.20 REMOVING THE FRONT PANEL AND THE FRONT FILTER
(Fig.5)
•
Remove the REAR COVER
•
Remove the CENTER COVER.
•
Remove the CHASSIS SHIELD COVER.
•
Remove the TERMINAL COVER.
•
Remove the MAIN BASE, CHASSIS BASE and AUDIO PWB
BASE (with each PWB affixed on the MAIN BASE, CHASSIS
BASE and AUDIO PWB BASE).
•
Remove the PDP UNIT.
u
(x2)
v
t (x5)
TOP FRAME
s
(x4)
u
SIDE FRAME
v
(x2)
t
(x3)
FRONT FILTER
TOP
(x3)
r
(1) Remove the 8 screws [s].
(2) Lift the FRAME BRACKETS and FRONT FILTER upright
and remove it with enough care not to damage the FRONT
FILTER.
(3) Remove the FRONT PANEL.
(4) Remove the 16 screws [t], and remove the FILTER
BRACKET.
(5) Remove the FRONT FILTER.
3.1.21 REMOVING THE TOP FRAME, BOTTOM FRAME AND SIDE
FRAME (Fig.5)
•
Remove the REAR COVER
•
Remove the CENTER COVER.
•
Remove the CHASSIS SHIELD COVER.
•
Remove the TERMINAL COVER.
•
Remove the MAIN BASE, CHASSIS BASE and AUDIO PWB
BASE (with each PWB affixed on the MAIN BASE, CHASSIS
BASE and AUDIO PWB BASE).
•
Remove the PDP UNIT.
•
Remove the FRONT FILTER.
(1) Remove the 4 bosses [u] and the 8 screws [v], and remove
the TOP FRAME, BOTTOM FRAME and SIDE FRAME.
u
(x2)
(x4)
s
v
u
f
SIDE FRAME
BOTTOM
FRAME
f
FRONT PANEL
Fig. 5
t (x3)
FILTER
BRACKET
v (x2)
t (x5)
r (x3)
SPEAKER
(No.YA101) 1-17