b.
Remove the top display hinge (2).
c.
Lift the tape that secures the left and right hinges to the enclosure (1).
d.
Remove the six broadhead Phillips PM2.5×2.0 screws (2) at the bottom of the hinges that secure
the left and right hinges to the display enclosure.
e.
Remove the two Phillips PM2.0×3.0 screws (3) in the middle of the hinges that secure the left and
right hinges to the display enclosure.
f.
Remove the left and right display hinges (4).
52
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts