Channel Setup; Auto Synchronization; Power On/Off Timer - JVC LT-24HA48E Operating Instructions Manual

Channel Setup

The Automatic station presetting stores the
stations in a specific order. However, this order
can be changed if you wish.
1
Press MENU. Press ◀ or ▶ to select "TV",
then press ▼ or ENTER.
2
Press ▲ or ▼ to select " Channels " , then press ▶
or ENTER.
3
Select desired option, then press ▶ or ENTER.
Channels Picture Audio
Channel Scan
Analogue Manual Scan
Digital Manual Scan
Channel Skip
Channel Sort
Description about the each setting option:
Channel Skip: Press ▲ or ▼ to select the channel
that you want to skip, then press ENTER. The
mark will appear.
Channel Sort: Press ▲ or ▼ to select the channel
that you want to move, then press ENTER. The
mark will appear.
Press ▲ or ▼ to select the position that you want
to move the channel to, then press ENTER.
Channel Edit: Press ▲ or ▼ to select the channel
that you want to edit, then press ENTER.
Following options are displayed.
- Channel Number: Press 0-9 buttons to enter
the desired memory position number, then press
ENTER.
- Channel Name: Press ENTER to enter edit
mode, then press ▲/▼ to select desired letter,
or ◀ to erase the letter, then press ENTER repeatly.
- Frequency (only for Analogue TV): You
can also directly enter the frequency value with
Number buttons (0-9), then press ENTER.
- Color System (only for Analogue TV): Color
System has already been preset to Auto. Do not
change anything here. Any changes can cause
picture or sound disruption.
- Sound system (only for Analogue TV):
Correct sound system is already installed. Any
changes can cause sound disruption.
Analogue Channel Fine Tune (only for Analogue TV):
Already correctly and optimally installed. Do not
change anything here. Any changes can cause
picture or sound disruption. The video can also be
affected.
Clean Channel List : Press ◀ to select "OK" and
ENTER to delete all Channel.
TV Setup Lock

Auto Synchronization

This feature can display the time based on the
DVB signal information.
If you wish to set the time manually, select "Off"
as follows and then perform the "Date" and "Time"
options.
1
Press MENU. Press ◀ or ▶ to select "Setup",
then press ▼ or ENTER and press ▲ or ▼ to
select "Time Setup", press ▶ or ENTER.
2
Press ▲ or ▼ to select "Time", then press ▶ or
ENTER.
Press ▲ or ▼ to select "Auto Synchronization",
then press ◀ or ▶ to select "Off".
Time Picture Audio
Auto Synchronization
Date
Time
Power On Timer
Timer
Power On Channel
Power Off Timer
Select
Back Timer
MENU
3
Press ▲ or ▼ to select "Date" or "Time", then
press ◀ or ▶, 0-9 to enter the correct time.
4
Press RETURN to exit the menu.

Power On/Off Timer

This feature allows you to programme the TV to
turn on or off automatically at a set time.
1
Press MENU. Press ◀ or ▶ to select "Setup"
press ENTER, then press ▲ or ▼ to select
"Time Setup", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Time", then press ▶ or
ENTER.
Press ▲ or ▼ to select "Power On Timer" or
"Power Off Timer", then press ◀ or ▶ to select
"Off", "On" or "Once".
• If you set the "Power On Timer", you can
also set the "Power On Channel".
3
Press RETURN to exit the menu.
TV Setup Lock
On
2012/04/26
11:12:34
Off
00:00:00
Off
00:00:00
13 EN