On-Screen Language Selection; Station Search; Manual Channel Scan - JVC LT-24HA48E Operating Instructions Manual

On-screen Language Selection

1
Press MENU. Then press ◀ or ▶ to select
"Setup", then press ▼ or ENTER.
Setup
2
Press ▲ or ▼ to select "OSD Language", then
press ◀ or ▶ to select the desired language.
3
Press RETURN to exit the menu.

Station search

Warning! All previously saved DVB-T channels
are deleted in Step 3. A new channel search
then starts automatically.
Preparation:
Make sure your antenna is connected to the
antenna input (see P.10). Then press MENU.
1
Press ◀ or ▶ to select "TV", then press ▼ or
ENTER.
2
Press ▲ or ▼ select "Channels", then press ▶
or ENTER.
3
Press ▲ or ▼ select "Channel Scan", then
press ▶ or ENTER.
Press ◀ or ▶ to select desired country, then
press ENTER.
Channels
4
The Channel Scan will search for available TV-
channels and store the channels in the correct
order.
Channel Scan
5
When TV programme have been stored 100%,
return to normal TV screen automatically.
EN 12
Picture Audio TV Setup
OSD Language English
Aspect Ratio Auto
Blue Screen Off
Time Setup
Subtitle
Picture Audio TV Setup
Channel Scan
Analogue Manual Scan
Digital Manual Scan
Channel Skip
Channel Sort
Picture Audio TV Setup
Status: Scanning...
Digital Channels: 7
Analogue Channels: 0
6%

Manual Channel Scan

Preparation:
Select "Analogue Manual Scan" or "Digital Manual
Scan" in Step 3 of Station search.
Analogue Manual Scan
Lock
Press ▲ or ▼ to select "Scan Up" or "Scan Down" to
start searching. Then press ▶ or ENTER.
Digital Manual Scan
Select RF Channel that you want to setup, then
press ENTER to start searching.
You can verify the signal strength and quality of
the selected service here. If necessary, adjust
the direction of the DVB-T antenna to obtain the
maximum signal strength.
Lock
Lock