D-Link GO-RT-N300 Quick Install Manual page 5

Connect another Ethernet cable from the Ethernet port on your computer
3
to one of the LAN ports on the router. You can also connect wirelessly to
the router with your computer. Complete steps 4 and 5 before attempting
to connect.
GO-RT-N300
Plug the power back into your DSL or cable modem. Please wait about
4
one minute before continuing.
Plug the power adapter into your router and connect to an available
5
power outlet or surge protector. If the Power LED does not light up, press
the Power button on the back of the router.
If connecting wirelessly, open your wireless utility on your computer and
connect to the router. The Wi-Fi network (SSID) is GO-RT-N300 with no
password.
After the router has powered up, verify that the Power and Internet LEDs are
6
both lit. Proceed with router configuration.
4 3 LAN 2 1 INTERNET POWER 12V 1A Ethernet Cable
RESET
WPS
4 3 LAN 2 1
Modem
GO-RT-N300
4 3 LAN 2
Modem
Computer
INTERNET POWER 12V 1A
RESET
WPS
GO-RT-N300
1 INTERNET POWER 12V 1A
RESET
WPS
Computer
Computer
5