Hardware Overview - D-Link GO-RT-N300 Quick Install Manual

Hardware Overview

1
2
1
Power LED
2
Internet LED
LAN Ports
3
(1-4)
4
Internet Port
5 Reset Button
6 Power Button Press to power the router on and off.
7
Power Port
8
WPS Button
A solid green light indicates a proper connection to the
power supply.
A solid green light indicates a connection to the Internet
port. The LED will blink during boot-up and during the WPS
process.
Connect Ethernet devices such as computers, switches, and
game consoles.
Connect your broadband modem to this port using an
Ethernet cable.
Press and hold the reset button with a paper clip for six
seconds to reset the router to the factory default settings.
Connect the supplied power adapter.
Press to start the WPS process. The Internet LED will start to
blink.
5 7
3 4 6
8
3