Battery Installation--- Remote Control - Craig CHT915 Owner's Manual

BATTERY INSTALLATION--- REMOTE CONTROL

-First Time Use
Remove and discard the insulation tab as figure on the right
-Replacing Batteries For Remote Control
1. Push and slide out the battery holder as figure 1 below.
2. Replace the battery with a new CR2025 button cell as the polarity
markings on the rear of the Remote Control.
3. Close the battery holder.
Fig.1
BATTERY PRECAUTIONS
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER
Fig.2
Fig.3
9
Remote Sensor
.
Approx.15 feet