Panasonic VQT9958 Operating Instructions Manual page 34

CONTENTS
Setup menus
SYSTEM menu
No./Item
18 System phase adjustment.
SYS H 0000 –3 : –13.4 µsec
OFFSET 0001 –2 : –8.96 µsec
0002 –1 : –4.52 µsec
0003 0 : 0 sec
0004 1 : +4.52 µsec
0005 2 : +8.96 µsec
0006 3 : +13.4 µsec
<Note>
Factory settings will remain unchanged even if an
attempt is
19 This sets whether the system phase is to be
adjusted by the unit or from the external
SYS SC/H encoder remote controller.
0000 REMOTE :
The system phase is adjusted from the
external encoder remote controller.
0001 LOCAL :
The system phase is adjusted by the unit.
<Note>
This setting does not take effect when LOCAL
has been selected as the SYSTEM menu item
No. 10 (ENCODER SEL) setting.
22 This sets the video level.
Max. variable range: ±3 dB
VIDEO LEVEL
0000 –128
: :
0128 0
: :
0255 127
The underlined items indicates the initial setting.
Video output signal adjustments
The video output signal adjustments are made by selecting the SYSTEM menu item No. 10 (ENCODER SEL) and No. 19 (SYS SC/H)
settings. A control matrix of the adjustments is shown below.
Setting
SYSTEM menu item SYSTEM menu item
10: ENCODER SEL 19: SYS SC/H
LOCAL
LOCAL
REMOTE
LOCAL
REMOTE
REMOTE
Description
SYSTEM menu item
11: SYS SC COAR.
12: SYS SC FINE
13: SYS H
Unit
Unit
External encoder remote
controller
34 (E)
No./Item
23 This sets the black level.
Max. variable range: 14 IRE
BLACK LEVEL
0000 –128
:
0128 0
:
0255 127
24 This sets the chroma phase.
Max. variable range: ±30°
CHROMA
PHASE 0000 –128
:
0128 0
:
0255 127
25 This sets the chroma level.
Max. variable range: ±3 dB
CHROMA
LEVEL 0000 –128
:
0128 0
:
0255 127
30 This selects whether the system file lock
mode is to be engaged or released.
MENU LOCK
0000 OFF : The lock is released (file data
0001 ON : The lock is engaged (file data
<Note>
Setup menu No. 00 (WFM SEL) can be changed
at any time regardless of the setting selected for
this menu item.
Item adjusted
SYSTEM menu item
22: VIDEO LEVEL
23: BLACK LEVEL
24: CHROMA PHASE
25: CHROMA LEVEL
Unit
External encoder remote
controller
Description
:
:
:
:
:
:
can be changed).
cannot be changed).