Remote Sensor - Audiovox PROVE8 Operation Manual

Remote Sensor

The PROVE8 incorporates two infrared sensors which relay signals
from the remote control to allow the unit to be controlled simply by
pointing its remote control at the remote sensor eye. The repeater
function allows control of auxiliary equipment such as an Audiovox
Video Cassette Player. The infrared sensor can relay signals from
most manufacturer's remote controls to its respective component
connected to the Video 1 inputs. In this case you must use the
remote control supplied with the component.
Special Operation Feature
• When system power is off, the PROVE8 can detect when a disc is inserted and automatically power on and load
the disc.
•
When system power is off, eject the disc by pressing the EJECT button.
•
Source will be automatically changed to DVD mode when a disc is inserted.
Accessories
Wireless Headphones
The PROVE8 includes a built-in infrared transmitter for use with Audiovox wireless headphones (Part Number
MVIRHS). The volume can then be adjusted using the controls on each headset. The wireless headphones must be
used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line.
See the documentation accompanying your Audiovox wireless headphones.
Wireless Headset Special Features
•
Automatic Level Control prevents input signal over loading.
•
Uses high frequency infrared light to assure a clean signal for clear reception.
P O W ER E JEC T RE W PL AY F.F ST O P
AU T O PIC TU RE
SO UR CE
P RO G RAM SE LE CT S EL EC T
CH A NN EL V O L UME
O N O F F AU T O
Remote
Sensor
Remote
Sensor
Eye