Vhs Hi-Fi Stereo System - Panasonic PV-V464S Operating Instructions Manual

VHS Hi-Fi Stereo System

Audio Mode for Recording
1
Press SAP/ Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
2
STEREO
SAP
MONO
• Arrow indicates selection.
3
Make a recording.
See p. 5 of "Basic Operations" Instruction book.
Audio Mode for Playback
1
Start playback.
See p. 5 of "Basic Operations" Instruction book.
2
Press SAP/ Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)
3
H I F I : L / R
H I F I : L
H I F I : R
NORMAL
• Arrow indicates
selection.
Notes
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a
stereo TV or an external stereo amp and speakers. (See page 4.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
*Important: If a remote control button does not work when pressed,
Press SAP/ Hi-Fi repeatedly
to select desired mode.
• Refer to "Receivable
Broadcast Types" on page 4.
Press SAP/ Hi-Fi repeatedly
to select desired mode.
• Select "HIFI(L/R)" or "HIFI(L)"
or "HIFI(R)" to listen to stereo
recordings in stereo sound.
Select "NORMAL" for
monaural sound.
press the VCR button on the remote and try the button again.
- 5 -