Playback / Record On A Tape - Panasonic PV-V464S Operating Instructions Manual

Playback / Record on a Tape

Playback a Tape
1
.
Insert a tape
• Loose or peeling labels
may cause tape jam.
• VCR power comes on. " VCR" lights
on Multi Function Display.
If Auto VCR/TV (see p. 10 of
Advanced Operations book) is set to
" OFF," press VCR/TV until " VCR"
lights on the Multi Function Display.
2
Press PLAY to play tape.
• If tape has no rec. tab (p. 3), auto play begins.
Special Features During Play
Forward/Reverse Scene Search
➛ Press FF or REW.
➛ Press PLAY to release.
After search has begun, each additional
press of FF or REW changes speed.
Notes
• Picture interruption may occur with some TVs.
• FF and REW search speed may vary depending
on current tape position.
• After 10 minutes in search mode, VCR returns to
Play mode to protect the tape and the video
heads.
Still (Freeze) Picture
➛ Press PAUSE/SLOW.
➛ Press PLAY to release.
Slow Motion Picture
➛ Hold down PAUSE/SLOW in Still mode.
➛ Press PLAY to release.
Notes
• These features work best in SP or SLP mode.
• The sound will be muted.
• To reduce picture noise, see "Manual
Tracking Control" on p. 3.
• After 3 minutes in Still or Slow mode, VCR
stops to protect the tape and the video heads.
3
Press STOP to stop tape.
Rapid Rewind/FF
Press REW or FF in Stop mode to
rewind or fast forward tape.
• Rewinds a T-120 tape in approx. 1 minute.
Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
Auto Operation Functions
Auto Play
➛
Insert a tape Power comes on
Auto Rewind
Play
Fast Forward
Play Auto Eject
(Repeat Play must be off)
➛
Play Tape end
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
➛
Play starts if there is no record tab (see p. 3).
➛ ➛
Tape end Rewind
➛ ➛ ➛
Rewind Stop
Record on a Tape
1
Insert a tape with a record tab (p. 3).
• VCR power comes on. " VCR" lights on
Multi Function Display.
If Auto VCR/TV (see p. 10 of Advanced
Operations book) is set to " OFF," press
VCR/TV until " VCR" lights on the Multi
Function Display.
2
Press CH
to select the channel.
• If channel number is over 100, first press 100
key then the other 2 digits.
• For "LINE" input, see p. 9 of "Advanced
Operations" book.
3
Press SPEED to set record speed (p. 3).
• SP = Standard Play
• SLP = Super Long Play
4
Press REC to start recording.
• To edit, press PAUSE/SLOW to pause, and
again to resume recording.
5
Press STOP to stop recording.
One Touch Recording
(recording in progress)
Press REC repeatedly to set length as follows:
➛
30 min.
➛ ➛
4:00
The VCR shuts off at the length set.
Record one station, watch another
Press VCR/TV
("VCR" goes out on Multi Function Display),
➛
select channels on TV (recording continues).
Select channels on VCR
Press VCR/TV in Stop or Pause mode.
("VCR" lights on Multi Function Display),
➛
select channels on VCR.
Notes
• Watching one channel and recording
another is not possible when using Cable
Box or DSS Receiver.
• After 5 minutes in Pause mode, VCR stops to
protect the tape and the video heads.
This video recorder, equipped with HQ
(High Quality) system, is compatible with
existing VHS equipment. Only use tapes
with the
inspected for use in 2, 4, 6, and 8 hour
machines are recommended.
➛
Stop
Tape ejects if there is no record tab
- 5 -
or NUMBER keys
➛ ➛ ➛
1 hr. 1:30 2:00
exit.
mark. Only tapes tested and
3:00