Panasonic SC-EN35P Service Manual page 15

Item
Mode Name
Doctor Mode To enter into Doctor Mode for
checking of various items and
displaying EEPROM and firmware
version.
Note: The micro-processor version as
shown is an example. It will be revise
when there is an updates.
FL Display sequence
Display 1 → 2
FL Display Test To check the FL segments display (All
segments will light up)
Description
DIsplay 1
Checksum (Condition 1)
When EEPROM IC detected and has ROM
correction.
Checksum (Condition 2)
When EEPROM IC is detected and there is
no ROM correction.
Checksum (Condition 3)
When EEPROM IC is detected and has ROM
correction but not working properly.
Display 2
The Check Sum of EEPROM and firmware
version will be display for 1 sec.
* ROM correction
** Firmware version No:
FL Display
15
SC-EN35P / SC-EN35PC
Key Operation
Front Key
In any mode:
1. Press [ ] button on main unit
follow by [4] and [7] on remote
control.
To exit, press [ ] button on
main unit or remote control.
In doctor mode:
1. Press [DIMMER] button on remote
control.
To exit, press [ ] button on
main unit or remote control.