Operating In The System Data Management Operating Area; Operating Area Overview; Overview - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

Operating in the system data management operating
area
3.1

Operating area overview

Softkey functions
Pressing this key combination allows you to open the following window. This operating area includes
functions required for parameterizing and analyzing the NCK, the PLC, and the drive. The start screen
displays the machine configuration data and softkeys available. Depending on the functions selected, the
+
horizontal and the vertical softkey bars vary. The screenshot below uses the turning variant as an example.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Sets the NC, PLC and HMI start up modes
Sets the system machine data
Configures the connected drives and motors
Provides PLC commissioning and diagnostics
Sets the system date and time and adjusts the brightness of the screen
Backs up and restores system data
Creates and restores startup archives, data archive
Performs the axis optimization
Enters the corresponding password (manufacturer password, and end user password)
for different access levels
Changes the password as per the corresponding access levels
Deletes the current password
3
13