Video Out Sd Set Up Sdi Menu - Panasonic AJ-HD2000 Operating Instructions Manual

VIDEO OUT SD SET UP SDI menu

Key Key designation
F1 COMB FIL°
F2 B. CLIP
F3–F4 — —
F5 SERIAL SYS PHASE
F6
F7 INTERP.
Interpolation
F8 EXIT
F9–F10 — —
F11 LINE BLK
F12 STATE
F13 — —
° This item does not appear when 525p (480/59p) is set for the SD SDI output. Similarly, it does not appear when
1080/50i, 625/50i, 1080/25psf or 1080/25p is the system format. (The output signals are not passed through the
comb filter.)
For selecting whether to pass the SD output (both of SDI output
and analog composite output) signals through the comb filter.
ON: The signals are passed through the comb filter and output.
OFF: The signals are not passed through the comb filter.
This is used to select whether signals below the SD output
pedestal level are to be clipped or not.
OFF: The signals are not clipped.
ON: The signals are clipped.
Adjusts the sync phase of SD_SDI output in relation to the
reference signal.
FINE/COARSE
≥This can be selected when the function key is pressed together
with the F key.
With the 480/59.94i format:
With the 480/59.94p format:
With the 576/50i format:
For FINE, adjustments are made in sample increments; for
COARSE, they are made in H increments.
Initiates vertical interpolation during AT playback to reduce the
vertical movement of the playback images.
AUTO: Automatically initiates interpolation in the JOG or VAR
mode.
OFF: No interpolation.
Returns the VTR to the VIDEO OUT SD menu screen.
For transferring to the video output line blanking menu.
NTSC: Lines 10 to 21.
PAL: Lines 8 to 22.
Transfers the VTR to the VIDEO OUT SD SET UP SDI STATE
menu screen.
– 37 –
Description
Adjustment can be made from
j2H-858 to i1Hi858.
Adjustment can be made from
j857 to +858.
Adjustment can be made from
j2H-864 to i1Hi864.