Video Menu - Panasonic AJ-D650 Operating Instructions Manual

USER menu
<TIME CODE> (continued)
No.
507
508
509
510
511
The underline on the setting item denotes the initial setting.
USER menu
<VIDEO>
No.
600
601
602
603
The underline on the setting item denotes the initial setting.
Setting
Item
Superimposed
Superimposed
No.
display
display
PHASE 0000
CORR 0001
0000
TCG CF
FLAG 0001
DF MODE 0000
0001
RUN MODE 0000
0001
TC OUT 0000 V OUT
REF 0001
Item Setting
Superimposed Superimposed
No.
display display
P /P 0000
B R
0001 B-CAM
IN LV
INT BB 0000
SIG 0001
INPUT 0000
0001
C KILL
0000
OUT
0001
VSYNC
– 3 4 –
OFF This selects whether to control the phase correction of the
LTC generated by the TCG.
ON
0: Phase correction control is not performed.
1: Phase correction control is performed.
This selects whether the CF flag of the TCG is to ON.
OFF
0: CF flag is OFF.
ON
1: CF flag is ON.
This selects the DF/NDF mode for CTL and TCG.
DF
0: Drop frame mode.
NDF
1: Non-drop frame mode.
No.509 is valid when the CONTROL is LOCAL or LOCAL
ENA of item 004 to "ENA".
This selects the time code generator run mode.
REC
0: Generator runs only during recording.
FREE
1: Generator runs during usual operation.
<Note>
Even if "0" is selected, the time code generator runs during
usual operation when "1" is selected at the setting menu
No.504 (REGEN MODE).
This is used to switch the phase of the time code, which is
output from the TIME CODE OUT connector, for the external
TC IN
LTC input when the TC INT/EXT switch is at the EXT
position. (In EE mode only)
0: Time code is synchronized with output video signal.
1: Time code is synchronized with external time code input.
M ΙΙ
This selects the component input signal level.
0: Mll level.
1: 0 cam level.
This selects whether to generate the internal black burst
OFF
BB signal.
0: Signal is not generated.
1: Signal is generated.
B/W This selects color killer processing for the video input signals.
AUTO 0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
N-VF This selects whether to float the vertical sync position of the
VF video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
Description
Description