Fujitsu PRIMEQUEST 2400E3 General Description Manual page 57

CHAPTER 1 Product Overview
1.5 Software technologies
Optimal driver installation
Guidance on bundled software
Hot fix application
ServerView Operations Manager (SVOM)
SVOM identifies hardware faulty parts, displays diagnosis on the console, and sends e-mail to the
administrator to support early recovery and stable operation.
ServerView Agent (SV Agent)
SV Agent monitors the status of the hardware and the operating system, and instructs operation from the
SVOM.
ServerView RAID Manager (SV RAID)
SV RAID is the management tool that monitors, manages, maintains, and configures the array controller and
the hard disks and logical drives connected to the RAID controllers.
ServerView Mission Critical Option (SVmco)
SVmco cooperates with PRIMECLUSTER or Primesoft Server to acquire the status of each partition and
stop the partition forcibly. SVmco is needed if you use PRIMECLUSTER or Primesoft Server.
The capacity of each compartment/partition can also be set.
General-purpose drivers and model-specific drivers exist even
for the same hardware. SVIM selects and installs the best-fit
driver for each model, so that the drivers do not cause any
problems after operation begins.
SVIM supports installation of the high-reliability tools, including
the hardware monitoring tool (ServerView) and RAID
management/monitoring tool (SV RAID) that must be installed.
Once a selection is made from the group of software products,
SVIM automatically installs the selected tool from the
CD/DVD.
SVIM applies an 'emergency' level hot fix for the operating
system. This prevents the occurrence of known faults and
promotes stable operation.
34 CA92344-0534-07