Table of Contents
Advertisement
1.
Compose your shot using the LCD screen.
2.
Hold the camera steady and press the Shutter button to take the photo.
3.
Keep your finger on the Shutter button and wait for the camera to focus in on the object.
4.
Center your object with the white frame that appears on the LCD.
5.
When the frame turns green the image will be captured.
6.
There will be a short delay while the camera saves the JPEG photo to memory.
After each photo is taken (when the camera returns to icon mode) the numbers of photos left to shoot at
the selected resolution is displayed on the top right of the LCD screen.
When the camera's memory (photo capacity) is full, the LCD screen will display a message -
"Memory Full, Insert a SD memory card to Transfer and Take More Photos!"
Download the photos to your computer using the Photags Express software as described
below in the section "Download photos and videos to your PC" and thereafter delete them
from your SD card or insert another SD card to continue taking more photos.
Note: This camera needs a SD memory card to operate normally. The limited internal memory allows
you to take very few test photos that will be erased when the camera powers off.
Optical Zoom
You can magnify your subject up to 5 times using the optical zoom by pressing the T button or pres the W
12
Advertisement
Table of Contents
