Accessories; Confirm The Mounting Level Of Main Unit - Mitsubishi Heavy Industries KX6 series Service Manual

Vrf inverter multi-system air conditioners
Hide thumbs Also See for KX6 series:
Table of Contents

Advertisement

PANEL INSTALLATION MANUAL
PANEL INSTALLATION MANUAL
Please read this manual together with installation manual of indoor unit.
(1) Parts Models : TQ-PSA-15W-E, TQ-PSB-15W-E
Please read this manual together with installation manual of indoor unit.
● Please perform electrical work after cutting off main power.
Otherwise, electrical shock or malfunction, etc. may occur.
● Please perform electrical work after cutting off main power.
Otherwise, electrical shock or malfunction, etc. may occur.
Notice
Notice
If the louver cannot be moved by remote control operation,
cut off the main power for over 10 seconds after confirming
If the louver cannot be moved by remote control operation,
the connection of connector, then turn on the power again.
cut off the main power for over 10 seconds after confirming
the connection of connector, then turn on the power again.
1

Accessories

1
Accessories
1
Air filter
2
Hanging bolts
1
Air filter
3
Screws (M4 L=8mm)
2
Hanging bolts
3
Screws (M4 L=8mm)

Confirm the mounting level of main unit

2
Confirm the mounting level of main unit
2
Drain hose (accessory)
mounted on site
Drain hose (accessory)
mounted on site
Confirm the mounting level of air conditioner and ceiling. Adjust the level of air conditioner so that the bottom of air
conditioner is at the same level as that of ceiling plate (the T-bar).
Confirm the mounting level of air conditioner and ceiling. Adjust the level of air conditioner so that the bottom of air
The level differential tolerance between the bottom surface of ceiling and that of main unit is that air conditioner
conditioner is at the same level as that of ceiling plate (the T-bar).
main unit cannot be higher than ceiling bottom surface for 5mm.
The level differential tolerance between the bottom surface of ceiling and that of main unit is that air conditioner
main unit cannot be higher than ceiling bottom surface for 5mm.
Caution
Do not set the main unit below the bottom surface of ceiling.
Caution
Do not set the main unit below the bottom surface of ceiling.
Confirm the level of air conditioner.
Confirm the level of air conditioner.
Indoor unit
Indoor unit
Warning
Warning
1
4
For mounting panel
1
2
For mounting chains
4
For mounting panel
2
For mounting chains
Ceiling opening dimension 740
(For wide panel)
Hanging bolt pitch 576
Ceiling opening dimension 740
(For wide panel)
Hanging bolt pitch 576
Control box
Panel center
Control box
Panel center
15
15
Transparent hose
Water
Transparent hose
Water
Short Panel
625
Short Panel
625
Air outlet
Air outlet
Suction inlet
Suction inlet
For tapping
For tapping
For tapping
For tapping
Ceiling plate
Ceiling plate
Adjust the level of air conditioner
so that the bottom of air
conditioner is at the same level as
Adjust the level of air conditioner
that of ceiling plate.
so that the bottom of air
conditioner is at the same level as
that of ceiling plate.
142
-
-
'10 • KX-SM-148
PJC012D118
PJC012D118
PJC012D118
3
3
① Attach 2 o
① Attach 2 o
Wide Panel
780
Wide Panel
780
Air outlet
Air outlet
② Open the s
② Open the s
③ Tighten the
③ Tighten the
Suction inlet
Suction inlet
④ Remove 2
④ Remove 2
⑤ Connect th
⑤ Connect th
⑥ After conn
⑥ After conn
⑦ Close cont
⑦ Close cont
⑧ Mount the
⑧ Mount the
⑨ Close suct
⑨ Close suct
⑩ If the louv
⑩ If the louv
Mount t
Mount t
diagonal p
diagonal p
When secu
the left fig
When secu
the left fig
(white 3P)
The conne
(white 3P)
The conne
hole. Hold
hole. Hold
mounting c
mounting c
seconds af
seconds af

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents