Tv Cable Box Universal Remote Control Feature - Panasonic PV 20DF63 Operating Instructions Manual

Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some basic
DSS or Cable box functions.
The Universal Remote Control Setup
Find your DSS box or Cable box Brand Code
1
Number from one of the charts on the next
page.
Set up remote. Hold down DSS CABLE and
2
press NUMBER keys to enter code.
• If code number is 100 or greater, e.g., press 1 - 0 - 2 for
102.
Confi rm code entry. Press POWER* to turn
3
selected unit ON or OFF.
• See below for controllable functions in each mode.
Notes
• Please repeat the Universal Remote Control Setup after
replacing remote control batteries.
• The remote control will not operate all DSS receivers or Cable
Boxes made by the manufacturers listed. If you get no results,
your particular brand cannot be controlled.
Using the Universal Remote Control
(Available Buttons / Functions)
Once the remote control has been properly set up, you can
select FM/TV, DVD, DSS or CABLE mode depending on
which functions you wish to control.
Press FM/TV, DVD or DSS CABLE
control to select the desired mode. (See below for buttons
available in each mode.)
Set to FM/TV, DVD:
All TV, FM, and DVD functions.
Set to DSS CABLE:
• CABLE/DSS function, e.g. POWER, ENTER, NUMBER keys
(except 100 key), CH UP/DOWN.
26 26
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
DVD
POWER
FM/TV
on the remote
OPEN/CLOSE LIGHT
DSS
FM/TV D V D DSS
CABLE
CABLE
+
NUMBER
keys
ADD/DLT
AUDIO ANGLE SUB TITLE DISPLAY
ENTER
TITLE MENU
S E T
ACTION RETURN
+
SKIP PLAY SKIP
PAUSE STOP ZOOM
SLOW/SEARCH