Tv Cable Box Universal Remote Control Feature - Panasonic PV 20DF62 Operating Instructions Manual

Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some
basic DSS or Cable box functions.
The Universal Remote Control Setup
1
Find your DSS box or Cable box
Brand Code Number from one of the
charts on the next page.
2
Setup remote.
Hold down DSS CABLE and press
number keys to enter code.
• If code number is 100 or greater,
e.g., press 1 - 0 - 2 for 102.
3
Confirm code entry.
Press POWER to turn selected unit
ON or OFF.
• See below for controllable functions in each mode.
Notes
• Please repeat the Universal Remote Control Setup
after replacing remote control batteries.
• The remote control will not operate all DSS receivers
or Cable Boxes made by the manufacturers listed.
If you get no results, your particular brand cannot be
controlled.
Using the Universal Remote Control
(Available Buttons / Functions)
Once the remote control has been properly set up,
you can select FM/TV, DVD, DSS or CABLE mode
depending on which functions you wish to control.
Press FM/TV, DVD or DSS CABLE
remote control to select the desired mode. (See
below for buttons available in each mode.)
Set to FM/TV, DVD:
All TV, FM, and DVD functions.
Set to DSS CABLE:
• CABLE/DSS function, e.g. POWER, ENTER,
NUMBER keys (except 100 key), CH UP/DOWN.
26
For assistance, please call : 1-800-211-PANA(7262) or send e-mail : consumerproducts@panasonic.com
on the
POWER
FM/TV
FM/TV
DVD
DSS
CABLE
NUMBER
AUDIO
keys
TITLE
ENTER
ACTION
SKIP
PAUSE
OPEN/CLOSE
LIGHT
DSS
D V D
CABLE
+
ADD/DLT
ANGLE SUB TITLE DISPLAY
MENU
S E T
RETURN
+
PLAY SKIP
STOP ZOOM
SLOW/SEARCH