Mounting The Camera - D-Link DCS-2330L Quick Installation Manual

MOUNTING THE CAMERA

Please refer to the steps below to assist you with mounting the camera. It is recommended that you
configure the camera before mounting.
1
2
3
4
DCS-2330L
Step 1:
Using the mounting plate as a guide, mark where you want to
position the camera. Depending on the material of the wall or ceiling,
use proper tools to drill two holes where the holes are located on
the mounting plate. If the wall is made out of concrete, drill the holes
first, then insert the plastic anchors to support the screws.
Step 2:
Place the mounting plate over the holes that are in the wall. Make
sure to align the mounting base holes with the holes in the wall. Use
the supplied screws to attach the mounting base to the surface of
the wall.
Step 3:
Place the mounting base cover on the mounting plate. Reattach the
camera mount onto the mounting base by holding the camera mount
and twisting the camera mount clockwise into the mounting base.
Step 4:
Adjust the angle of the camera as desired, then tighten the collar on
the cameara stem to lock it in place.
3