Mounting The Camera - D-Link DCS-2630L User Manual

Section 2 - Installation
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
Step 1
Rotate the camera base cover counterclockwise, then lift it to expose the mounting holes.
Step 2
Place the camera base where you want to position the camera and use a pencil to mark the holes.
Step 3
Depending on the material of the wall or ceiling, use proper tools to drill four holes 25mm deep with a 6mm
drill bit where you marked. If the wall is made out of concrete, drill the holes first, then insert the plastic
anchors to support the screws.
D-Link DCS-2630L User Manual

Mounting the Camera

1
2
3
14