1
Adjusting the thread trimmer device -900/82
.07
1
Preliminary testing
.07 .01
1
Assembly of the thread clamp carrier and thread catcher
.07 .02
1
Fig. 1 - 27
● Assemble thread clamp carrier 1 and thread catcher 2 depending on the hock size:
-
Large hock assembly (bobbin diameter 26 mm) is shown in Fig. 1 - 27.
-
Extra large hock assembly (bobbin diameter 32 mm) is shown in Fig. 1 - 27a.
1
Check settings according to the following chapter:
.07 .03
● Check the home position of the handwheel.
● Check lower, upper and needle feed sliding movement.
● Check bottom transporter lifting movement..
2
Fig. 1 - 27a
1
Adjusting
2
35