1.2.3
Redial
This is convenient when calling the same outside party again.
–
Last Number Redial
Last Number Redial
PT/SLT/PS
Off-hook.
Press REDIAL or enter # .
•
Up to 32 digits can be stored and redialed.
•
After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
•
To redial automatically, press the SP-PHONE button and then the REDIAL button, or press
the REDIAL button directly. It will keep trying the busy number until the called party answers
or until a specified timeout (Automatic Redial). You can perform other tasks during dialing. To
cancel, press the FLASH/RECALL button.
Some CO lines may not support this feature.
1.2.4
When the Dialed Line is Busy or There is No Answer
–
Automatic Callback Busy
–
Call Waiting
–
Message Waiting
–
Executive Busy Override
–
Call Monitor
–
DND Override
Automatic Callback Busy
You can set the telephone to receive callback ringing:
•
when a dialed extension becomes idle.
•
when your desired CO line that is in use by another extension becomes idle.
You cannot set Automatic Callback Busy for a busy party outside of the PBX.
When you answer the callback ringing:
•
For an outside call: The line is seized.
•
For an intercom call: The called extension starts ringing automatically.
REDIAL
OR
1.2 Making Calls
User Manual
31