When You Use A Panasonic Proprietary Telephone - Panasonic KX-TDA100 User Manual

When You Use a Panasonic Proprietary Telephone

If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature
buttons described below. For a PS user, refer to "Operating Instructions" for PS. These buttons make
operations simple. The illustrations may differ from the buttons on your telephone.
Fixed Buttons
CO:
Used to make or receive an outside call.
(CO) (Button assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
(Only the CO line "number" [e.g., 1, 2]
may be shown on some telephones.)
AUTO DIAL/STORE:
AUTO DIAL
Used for System/Personal Speed Dialing
or storing program changes.
STORE
REDIAL:
Used to redial the last dialed number.
REDIAL
INTERCOM:
INTERCOM
Used to make or receive intercom calls.
MONITOR:
Used for hands-free dialing. You can
MONITOR
monitor the party's voice in hands-free
mode.
TRANSFER:
Used to transfer a call to another party.
TRANSFER
FLASH/RECALL:
FLASH/
Used to disconnect the current call and
RECALL
make another call without hanging up.
This button can also be used as a
CANCEL button while on-hook.
VOICE CALL/MUTE:
VOICE CALL
Used to monitor an intercom call
automatically, but it cannot be used for
MUTE
hands-free conversations. It also mutes
the handset microphone during a
conversation.
1.1 Before Operating the Telephones
SP-PHONE:
Used for hands-free operation.
SP-PHONE
PAUSE:
Used to insert a pause when storing a
PAUSE
telephone number. This button also
functions as the PROGRAM button when
there is no PROGRAM button on your
telephone.
MESSAGE:
MESSAGE
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
Soft Buttons:
Used to select the item displayed on the
bottom of the display.
AUTO ANS (Auto Answer)/MUTE:
AUTO ANS
Used to receive an incoming call in
hands-free mode or mute the microphone
MUTE
during a conversation.
HOLD:
Used to place a call on hold.
HOLD
CONF (Conference):
CONF
Used to establish a multiple party
conversation.
Call Forwarding (FWD)/Do Not Disturb
(DND):
FWD/DND
Used to perform Call Forwarding (FWD)
or Do Not Disturb (DND).
User Manual 17