Clearing Features Set At Your Extension (Extension Feature Clear) - Panasonic HYBRID IP-PBX KX-TDA100 User Manual

1.7.13 Clearing Features Set at Your Extension (Extension
Feature Clear)
You can reset the settings of the following features on your extension to the default settings with one
operation.
This feature is also known as Station Programme Clear.
Hot Line*
Message Waiting—(All the messages that have been left by other
extension users)
Call Pickup Deny
Call Forwarding (FWD)*
Absent Message
Paging Deny
Timed Reminder
Do Not Disturb (DND)*
Call Waiting for intercom calls*
Call Waiting for outside calls*
Executive Busy Override Deny
BGM
Data Line Security
Parallelled Telephone
Log-in/Log-out
* These features may not be reset depending on the system programming.
PT/SLT/PS
Off-hook.
• For Users in Canada Only:
After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable
(Tone)". In this case, dial tone 2 will be heard when you go off-hook.
Features
7 9 0
C.Tone
790 .
Enter
1.7 Setting the Telephone According to Your Needs
Off
Off
Allow
Off
Off
Allow
Cleared
Off
Disable (No call)
Disable (No tone)
Allow
Off
Off
The telephone in parallel rings.
Log-in
On-hook.
Default Setting
User Manual 125