Tripp Lite SmartOnline SU750RTXLCD2U Owner's Manual page 23

Operation
To Advance to
the Next Screen:
Press SCROLL ( )
v
13
The FACTORY DEFAULT selection screen will appear.
 

To Advance to
the Next Screen:
Press SCROLL ( )
v
Continued on page 24.
13-11-176-93-3156.indb 23
To Change This
Setting:
SCROLL
Press "SELECT" ( ^ )
UPS MODEL
SU750RTXLCD2U
SU1000RTXLCD2U
SU1500RTXLCD2U
SU2200RTXLCD2U
SU3000RTXLCD3U
Scroll through available values and press SELECT ( ^ ) to SET.
Factory default = NO BP
If you're planning on using your UPS with the additional supported battery pack option
listed above as battery pack option 3, EXTERNAL BATTERY CONFIGURATION TOOL software
is required. After the EXTERNAL BATTERY CONFIGURATION TOOL software is used, the UPS
will display the resulting configuration as "BP TOOL" on the LCD screen. BP TOOL is present
as an LCD viewable option, but is itself not selectable (if BP TOOL selection is attempted,
the screen will report "READ ONLY. SELECT BY BP TOOL" to confirm the selection has not
been accepted). EXTERNAL BATTERY CONFIGURATION TOOL software is a Windows only
application and requires a serial cable connection to the UPS in order to run.
Visit http://www.tripplite.com/bpconfig to download the software.
Battery Pack Models That Require Use of EXTERNAL BATTERY CONFIGURATION TOOL
Software:
UPS MODEL
SU750RTXLCD2U
SU1000RTXLCD2U
SU1500RTXLCD2U
SU2200RTXLCD2U
SU3000RTXLCD3U
FACTORY DEFAULT gives users a quick and easy way to return the UPS to its' original
factory configuration. When selecting YES to FACTORY DEFAULT in the LCD Set-Up screens,
the UPS will immediately revert to the original shipping configuration and set of presets.

Running a FACTORY DEFAULT will restore these factory settings:
OUTPUT VOLTAGE = 120
OUTPUT FREQUENCY = 60Hz
BYPASS RANGE = WIDE
OVERLOAD ALARM = 105%
SHUTDOWN AFTER = DISABLE
BATTERY SAVE = DISABLE
STANDBY MODE = NO OUTPUT
FREQ CONVERTER = DISABLE
To Change This
Setting:
Press "SELECT" ( ^ ) SCROLL
Note: The UPS must be
in Standby Mode to
change this setting.
NO BP*
Press "SELECT" ( ^ ) to SET this value.
Press "SCROLL" (
SELECT
Available values are:
Configure via LCD
Factory Battery pack Battery pack
Default option 1 option 2
NO BP BP24V15RT2U BP24V28-2U
NO BP BP24V15RT2U BP24V28-2U
NO BP BP48V24-2U BP48V60RT3U
NO BP BP48V24-2U BP48V60RT3U
NO BP BP72V15-2U BP72V28RT-3U
BP24V70RT3U (for any number)
BP24V70RT3U (for any number)
BP48V60RT3U (for more than 1)
BP48V60RT3U (for more than 1)
BP72V28RT3U (for more than 1)
Press "SELECT" ( ^ ) to SET this value.
NO
Press "SCROLL" (
Available values are: NO, YES
SELECT
Scroll through available values and press SELECT
( ^ ) to SET.
Factory default = None
23
) to advance to the next option.
v
Configuration via EXTERNAL BATTERY
CONFIGURATION TOOL software
Battery pack option 3
(BP TOOL on LCD display)
BP24V70RT3U (for any number)
BP24V70RT3U (for any number)
BP48V60RT3U (for more than 1)
BP48V60RT3U (for more than 1)
BP72V28RT3U (for more than 1)
BATTERY PACK MODEL
ECONOMY MODE = DISABLE
COLD START = ENABLE
BATTERY TEST = MONTHLY
EXTERNAL BATT = NO BP
FACTORY DEFAULT = YES
AUDIBLE ALARM = ENABLE
ALARM HISTORY = ALL MESSAGES CLEARED
INFORMATION = NO CHANGE
) to advance to the next option.
v
11/27/2013 4:25:01 PM