Dynamic Volume - Denon AVR-X3200W Owner's Manual

Contents
o Reference Level Offset
Audyssey Dynamic EQ
makes adjustments to maintain the reference response and surround
envelopment when the volume is turned down from 0 dB. However,
film reference level is not always used in music or other non-film
content. Dynamic EQ Reference Level Offset provides three offsets
from the film level reference (5 dB, 10 dB, and 15 dB) that can be
selected when the mix level of the content is not within the standard.
Recommended setting levels for content are shown below.
0 dB (Film Reference)
(Default):
5 dB :
10 dB :
15 dB :
0 Setting is enabled when "Dynamic EQ" is "On". (v p. 163)
Front panel
Downloaded from www.Manualslib.com
Connections Playback
is referenced to the standard film mix level. It
®
Optimized for content such as movies.
Select this setting for content that has a
very wide dynamic range, such as
classical music.
Select this setting for jazz or other music
that has a wider dynamic range. This
setting should also be selected for TV
content as that is usually mixed at 10 dB
below film reference.
Select this setting for pop/rock music or
other program material that is mixed at
very high listening levels and has a
compressed dynamic range.
Display Rear panel
manuals search engine
Settings
o Dynamic Volume
Solves the problem of large variations in volume level between TV,
movies and other content (between quiet passages and loud
passages, etc.) by automatically adjusting to the user's preferred
volume setting.
Heavy:
Medium:
Light:
Off
(Default):
0 If "Dynamic Volume" is set to "Yes" in "Audyssey
automatically changed to "Medium". (v p. 186)
164
Remote
Tips Appendix
Most adjustment to softest and loudest
sounds.
Medium adjustment to loudest and
softest sound.
Least adjustment to loudest and softest
sounds.
Do not use Dynamic Volume.
® Setup", the setting is
Index