Panasonic SC-PM19 Operating Instructions Manual page 15

3
2
DEL
1
©
1
6
CD
2
PROGRAM
3
DISC
4
ABC DEF
1 2 3
GHI JKL
4 5
5
6
Repeat steps 3, 4, 5.
7
6
CD
4
5
7
4
4
/REW/ ,
¢
3
/FF/
CLEAR
CDs
Program play
This function allows you to program up to 24 tracks.
1
Press [CD 3/8] and then [7 CLEAR].
2
Press [PROGRAM].
3
Press [DISC].
4
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5
Press the numeric button(s) to select the
desired track.
6
Repeat steps 3 through 5 to program other tracks.
7
Press [CD 3/8] to start play.
To Action
cancel program Press [PROGRAM] in the stop mode.
play mode Programmed contents will be saved in
memory.
clear the last track Press [DEL] in the stop mode.
clear all Press [7 CLEAR]. Within 5 seconds,
programmed tracks press the button again to clear all
tracks. "CLEAR ALL" is displayed.
select a two-digit Press [h10] and then the two numbers
track you want.
When "CD FULL" appears
The number of programmed tracks is limited to 24 only.
You can do the following during program mode:
"PGM" appears on the display when play is stopped. Press [4 4 4 4 4 /
REW/4] or [3 3 3 3 3 /FF/¢] when "PGM" is displayed.
To check while programming, press [PROGRAM] twice after
"PGM" appears, then press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢].
Add to the program.
Repeat steps 3 through 5 in the stop mode.
Memory retention
Your program is retained in memory for about 1 week while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
1.Press [PROGRAM].
2.Press [CD 3/8].
Notes
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
• You can use repeat mode with program play.
• You cannot program CD-DA together with MP3 tracks.
15
RQT7369